Spare F-6 Drive Belts.
P400 - 34.625 Width .500 According to David Webb of REBB Industires, (via Michael Conner's restoration document), these are Panther #400 woven belts or equivalent and are commercially available. Note that Conner's press has a belt marked in white 9/16" x 34 1/2" and is shown mounted on the press rough side out (with the markings.) |
Current (Dec 2014) supplier information about Panther 400 belts
Note that this spec says that for normal conditions, the belt should be run smooth side against the pulleys. Running rough side against the pulleys is recommended for dirty conditions. |
Time to tear down the lower drive assembly and see what can be learned.